Bộ làm mát DTI/DTS 6201C, Pfannenberg Vietnam
Xuất sứ: Germany
Nhà cung cấp: PitescoVietNam
Liên hệ tư vấn
AdminPfannenberg Vietnam, Bộ làm mát DTI/DTS 6201C, Đại lý chính hãng Pfannenberg Vietnam
DTI: for partially recessed mounting in the door or side
DTS: for outer mounting on the door or side
- robust: steel cover, easily paintable
- compact design for smaller cabinets or to cool hot spots
- very high energy efficiency ratio (EER)
- interface to use εCOOL-Plant software at the Multi Controller (MC) model with operating hours counter and error history observation for preventive maintenance processes and exact error analysis
- condenser with large fin spacing enables very long maintenance intervals even without additional Nano coating
- large distance between intake and exhaust vents for safe air circulation and elimination of hot spots
- service friendly due to direct access to the PCB and the fans, thus 80 % shorter repair times
- additional temperature sensor in the Multi Controller model allows the deactivation of the internal fan and condensate evaporation for additional 10 % energy savings and service life extension of the fan
- optional pre-filter upgradable with aluminium, nonwoven or fluted filter, for the application of the cooling units in different ambient conditions
| Data | DTI 6201C | DTS 6201C | |||
|---|---|---|---|---|---|
| Rated voltage ¹ ±10 % | AC 50/60 Hz | ||||
| 230 V | 400 V 2~ | 230 V | 400 V 2~ | ||
| Cooling capacity according to EN 14511 |
A35/A35 | 1000 W | |||
| A35/A50 | 590 W | ||||
| Ambient temperature | +15 … +55 °C | ||||
| Degrees of protection according to EN 60529 |
IP 54 | towards the electrical enclosure if used as intended by the manufacturer |
|||
| Condensate management | integrated condensate evaporation system with safety overflow | ||||
